Project

Welcome to the screwdriving system configurator from STÖGER AUTOMATION GmbH. In order to obtain correct system configurations, please use only the buttons of the configurator. Using the forward/back arrows of the browser can falsify the result.

Mandatory fields are marked with an asterisk*. For the best possible limitation of the screwdriving system, however, as many fields as possible should be filled in.

Please enter your screw dimensions first:

Mandatory field Screw head shape* Screw, cylinder headScrew, lens headScrew, sunk headScrew, hex headGrub screw with engagementScrew, cylindrical head with washerScrew, lens head with washerScrew, hex head with washerScrew, flow drill forming screwStud (without engagement)Nut, no flangeNut with flangeWire thread insertBlind rivet nutBlind rivet studpunch nutPin, symetricPin, non symetricScrew with roof washerDouble end stud

Deployment scenario Rotary table, conveyor or stationaryattached to robotMulti functional system

Wrench width [SW]

Head or collar Ø [KD][BD] mm

Head height [KH] mm

Mandatory field Shaft Ø [SD]* mm

Mandatory field Shaft length [SL]* mm

Torque Nm

Obstacle around workpiece noyes

Interfering contours are component geometries or other structures, such as tool clamps, which protrude beyond the screwdriving location or in the immediate vicinity. When specifying possible interfering contours, please consider that right and left components have different interfering contours as well as the transport direction of the components.

 

 

Obstacle on one sideon two sidessunkseveral

Length A mm

Length B mm

Length C mm

Length D mm

Height E mm

Screw driving cycle time

Rundown

Count rotations to find engagement rot. (ca. 1-2)

Count rotations to drive rot. (ca. 1,5xSD)

with rpm rpm

Torque

Count rotations to torque rotations

with rpm rpm

Waiting time on screw head s

Time for head stroke s (one way)

Time for screw driving stroke s (one way)

Feed hose length

Customer times to position

Screw driving unit s

Work pice s

Count of screws per part s

Mandatory field Select system type* Hand-held screwdriverAutomatic screwdriver

View solutions