Product overview:
Automatic nutrunner (SMZ 32)
- save positioning of the nut even where there are obstacles, using a centering pin
- short cycle times due to minimal movement of masses with no up and down motion of the motor
- compact design
- Torque up to 60 Nm
Feed unit (ZSE 1800)
- Bowl feeder
- High output volume
- Suitable for all types of non-coated, non-lubricated or non-micro-encapsulated fastening elements
- Download data sheet
Screw pressent sensor
- Can optionally be used to improve the cycle time
Hand-held screwdriver for screws (HS 30 ZKS)
- No force is required during the fastening process
- Ergonomic design allows fatigue-proof handling
- Quick positioning of the screw allows for shorter cycle times
- Open drive interface, pneumatic or electric, free choice of type and brand
- Download data sheet
Automatic screwdriver for screws (RSX 12)
- Compact screwdriving unit
- For use on robots with a payload from 3.5 kg
- Screwdriving cycle time from 1 sec. possible.
- Download data sheet
Automatic nutrunner (SEM 2001)
- easy positioning of the nut even where there are obstacles, using vacuum technology
- short cycle times due to minimal movement of masses with no up and down motion of the motor
- bit change without tool
- slim design
- Torque up to 4.5 Nm
Feed unit (ZSE 1800 ELK)
- Bowl feeder
- High output volume
- Suitable for all types of non-coated, non-lubricated or non-micro-encapsulated fastening elements
- Download data sheet
Feed unit (ZSE 2600)
- Bowl feeder
- High output volume
- Suitable for all types of non-coated, non-lubricated or non-micro-encapsulated fastening elements
- Download data sheet
Automatic screwdriver for screws (RSV 12)
- Compact screwdriving unit
- For use on robots with a payload from 3.5 kg
- Screwdriving cycle time from 1 sec. possible.
- Download data sheet
Feed unit (ZSE 2600 ELK)
- Bowl feeder
- High output volume
- Suitable for all types of non-coated, non-lubricated or non-micro-encapsulated fastening elements
- Download data sheet
Pistol gripp
- For horizontal use
Controller (FAS)
- Sequence control
- parameterized for your application
- installed in the feeder
Setting unit (EDE 1601)
- suitable for fasteners like pins, balls or bushings
- integrated head stroke makes the feed head travel to the work piece before the setting process starts
- suitable for fasteners with a diameter of max. 7 mm
- very short cycle times
- very high availibility
Screwdriving stations
We design and manufacture customised assembly cells, screwdriving stations and systems for manual work stations for automated and semi-automated assembly. Other operational steps, before or after the fastening process, can be integrated, such as lubricating, adhesive bonding or machining the work piece, scanning of bar codes or prinitig of labels, etc.
Feel free to contact us - we will be pleased to develop an optimum solution for you.
Special applications
We design individual solutions for almost any application, with respect to technical specifications and regulations for operating equipment. Thus, many of our products are the result of successful customised developments.
Once the machine has been designed and built, we offer to support commissioning or integration into existing systems as well as production assistance.
Feel free to contact us - we will be pleased to develop an optimum solution for you.
Hand-held screwdriver for screws (HS 30 ZKF)
- No force is required during the fastening process
- Ergonomic design allows fatigue-proof handling
- Quick positioning of the screw allows for shorter cycle times
- Open drive interface, pneumatic or electric, free choice of type and brand
- Download data sheet
Screw driving unit FSF
- Compact screwdriving unit
- For use on robots with a payload from 350 kg
- optional with magazin
- data sheet
Automatic screwdriver for screws (SRL 21)
- For use on robots with a payload from 4.5 kg and on 3-axis systems
- Screwdriving cycle time from 2-3 sec. possible.
- Download data sheet
Automatic screwdriver for screws (SRL 101)
- For use on robots with a payload from 6.5 kg and on 3-axis systems
- Screwdriving cycle time from 2-3 sec. possible.
- Download data sheet
Automatic screwdriver for screws (SEL 21)
- For use on e.g. rotary table systems, conveyor belts or stationary.
- Screwdriving cycle time from 2-3 sec. possible.
- Download data sheet
Setting unit (EDE 2001)
- suitable for fasteners like pins, balls or bushings
- integrated head stroke makes the feed head travel to the work piece before the setting process starts
- suitable for fasteners with a diameter of max. 11 mm
- very short cycle times
- very high availibility
Setting unit (EDE 2501)
- suitable for fasteners like pins, balls or bushings
- integrated head stroke makes the feed head travel to the work piece before the setting process starts
- suitable for fasteners with a diameter of max. 15 mm
- very short cycle times
- very high availibility
Setting unit (EDE 3201)
- suitable for fasteners like pins, balls or bushings
- integrated head stroke makes the feed head travel to the work piece before the setting process starts
- suitable for fasteners with a diameter of max. 24 mm
- very short cycle times
- very high availibility
Automatic nutrunner (SEM 2501)
- easy positioning of the nut even where there are obstacles, using vacuum technology
- short cycle times due to minimal movement of masses with no up and down motion of the motor
- bit change without tool
- slim design
- Torque up to 12 Nm
Automatic screwdriver for screws (SEL 101)
- For use on e.g. rotary table systems, conveyor belts or stationary.
- Screwdriving cycle time from 2-3 sec. possible.
- Download data sheet
Controller (eControl 3051)
- Compact sequence control
- 7" touch
- Anybus port
- Download datasheet
Hand-held screwdriver for screws (HSV 30 ZKS)
- Required when interferences prevent free access to the screwdriving location
- No force is required during the fastening process
- Ergonomic design allows fatigue-proof handling
- Open drive interface, pneumatic or electric, free choice of type and brand
- Download data sheet
Screwdriving units for studs
- suitable for studs
- studs without recess / slot (application of force)
- double-threaded bolts (with collar)
- threaded sleeves or bushings
- CAD-files on request
Setting unit (EDE-S)
- heavy version with forces up to 100 kN
- suitable for different fasteners like pins, balls or bushings
- integrated head stroke makes the feed head travel to the work piece before the setting process starts
- suitable for fasteners with a diameter of max. 24 mm
- very short cycle times
- very high availability
Automatic nutrunner (SEM 3201)
- easy positioning of the nut even where there are obstacles, using vacuum technology
- short cycle times due to minimal movement of masses with no up and down motion of the motor
- bit change without tool
- slim design
- Torque up to 45Nm
Automatic screwdriver for screws (SRV 21)
- For use on e.g. turntables, conveyor belts or robots
- Required when interferences prevent free access to the screwdriving location
- Screwdriving cycle time from 2-3 sec. possible.
- Download Datasheet
Automatic screwdriver for screws (SRV 101)
- For use on e.g. turntables, conveyor belts or robots
- Required when interferences prevent free access to the screwdriving location
- Screwdriving cycle time from 2-3 sec. possible.
- Download Datasheet
Automatic nutrunner (SRM 100)
- easy positioning of the nut even where there are obstacles; using vacuum technology
- high torques posiible due to special design
Setting unit for blind rivet nuts (BMS 6254)
- field of application mainly automotive industry and automotive component suppliers
- designed for a draw force of 25 kN
- low operating costs
- high availability
Driving unit for coil thread inserts
- suitable for coil thread inserts (also called Helicoil® or CoilThread)
- no feeding from a magazine necessary
2x Controller (eControl 3051)
- Compact sequence control
- 7" touch
- Anybus port
- Download datasheet
Handschrauber für Muttern (HSM)
- automatic bit stroke for ergonomic handling
- available also in a vacuum version (for high protruding obstacles)
- highly flexible due to free choice of motor (pneumatic or electric)
- maximum availability due to operation without additional tools
Automatic screwdriver for screws (SER 16)
- For use on robots with a payload from 4.5 kg and on 3-axis systems
- Screwdriving cycle time from 1 sec. possible.
- Download data sheet
Automatic screwdriver for screws (SER 20)
- For use on robots with a payload from 6.5 kg and on 3-axis systems
- Screwdriving cycle time from 1 sec. possible.
- Download data sheet
Belt hopper NFB 1000
- To increase autonomy time
- Capacity 10 litres
Setting unit for blind rivet nuts (BMS 6600)
- field of application mainly automotive industry and automotive component suppliers
- designed for a draw force of 30 kN
- low operating costs
- high availability
3x Controller (eControl 3051)
- Compact sequence control
- 7" touch
- Anybus port
- Download datasheet
Automatic screwdriver for screws (SER 25)
- For use on robots with a payload from 8.5 kg and on 3-axis systems
- Screwdriving cycle time from 2 sec. possible.
- Download data sheet
Hand-held nutrunner (HMH)
- automatic bit stroke for ergonomic handling
- available also in a vacuum version (for high protruding obstacles)
- highly flexible due to free choice of motor (pneumatic or electric)
- maximum availability due to operation without additional tools
Belt hopper NFB 2500
- To increase autonomy time
- Capacity 25 litres
Automatic screwdriver for screws (SER 32)
- For use on robots with a payload from 10 kg and on 3-axis systems
- Screwdriving cycle time from 2 sec. possible.
- Download data sheet
Automatic screwdriver for screws (SES 16)
- For use on e.g. rotary table systems, conveyor belts or stationary.
- Screwdriving cycle time from 1 sec. possible.
- Download data sheet
Automatic screwdriver for screws (SES 20)
- For use on e.g. rotary table systems, conveyor belts or stationary.
- Screwdriving cycle time from 1 sec. possible.
- Download data sheet
Automatic screwdriver for screws (SES 25)
- For use on e.g. rotary table systems, conveyor belts or stationary.
- Screwdriving cycle time from 2 sec. possible.
- Download data sheet
Enclosure
- Complete housing for the feeding unit
- Solid base with feet or casters
- Protects against dust and reduces noise emission
- Optional lockable maintenance doors
Feed unit (ZEG 2600 MVe)
- Bowl feeder
- High output volume
- Suitable for all types of non-coated, non-lubricated or non-micro-encapsulated fastening elements
- Download data sheet
Automatic screwdriver for screws (SES 32)
- For use on e.g. rotary table systems, conveyor belts or stationary.
- Screwdriving cycle time from 3 sec. possible.
- Download data sheet
Particle sluice
- To improve the Technical Cleanliness
- Extraction of abrasion and impurities
- Especially suitable in combination with a step feeder
- Functionality
Feed unit (ZSE 4000)
- Bowl feeder
- High output volume
- Suitable for all types of non-coated, non-lubricated or non-micro-encapsulated fastening elements
- Download data sheet
Controller (MCS 4X10)
- Sequence and screw driving controler
- 7" touch
- Anybus optional
- Pneumatic components
- Download datasheet
Feed unit (ZSE 4000 ELK)
- Bowl feeder
- High output volume
- Suitable for all types of non-coated, non-lubricated or non-micro-encapsulated fastening elements
- Download data sheet
Rotatable adapter
- Handle in turnable design
- For ergonomic working
Brake unit
- Stops the acceleration of the screw to prevent damage to the screwdriving unit
- Used for heavy screws
Automatic screwdriver for screws (SEV 20)
- For use on e.g. turntables, conveyor belts or robots
- Required when interferences prevent free access to the screwdriving location
- Screwdriving cycle time from 2-3 sec. possible.
- Download Datasheet
Remote maintenance router
Universal secure industry router
- LAN
- WLAN
- 4G EU or AT&T
Profinet
- Customer interface Profinet
Spare parts HS
- 3 x bit
- 1 x bit adapter
- 1 x feed hose
Feed unit (ZEG 4000 MVe)
- Bowl feeder
- High output volume
- Suitable for all types of non-coated, non-lubricated or non-micro-encapsulated fastening elements
- Download data sheet
Controller (MCS 4X21)
- Sequence and screw driving controler
- 7" touch
- Anybus optional
- Pneumatic components
- Download datasheet
Feed unit (STF 8010)
- Step feeder
- Suitable for all types of fastening elements
- Low in vibration
- Download data sheet
Automatic screwdriver for screws (SEV 25)
- For use on e.g. turntables, conveyor belts or robots
- Required when interferences prevent free access to the screwdriving location
- Screwdriving cycle time from 2-3 sec. possible.
- Download Datasheet
Feed unit (STF 8010 ELK)
- Step feeder
- Suitable for all types of fastening elements
- Low in vibration
- Download data sheet
Feed unit (STF 9020)
- Step feeder
- Suitable for all types of fastening elements
- Low in vibration
- Download data sheet
Feed unit (STF 9020 ELK)
- Step feeder
- Suitable for all types of fastening elements
- Low in vibration
- Download data sheet
Spare parts HSV
- 3 x bit
- 1 x feed hose
- 1x vacuum screw driving tool complete
Feed unit Segment feeder (SGF 2)
- Segment feeder
- Particularly suitable for fasteners with sensitive surface
- Works without vibration
2x Controller (MCS 4X21)
- Sequence and screw driving controler
- 7" touch
- Anybus optional
- Pneumatic components
- Download datasheet
Feed unit Segment feeder (SGF 2 ELK)
- Segment feeder
- Particularly suitable for fasteners with sensitive surface
- Works without vibration
Feed unit Segment feeder (SGF 3)
- Segment feeder
- Particularly suitable for fasteners with sensitive surface
- Works without vibration
Automatic screwdriver for screws (SEV 32)
- For use on e.g. turntables, conveyor belts or robots
- Required when interferences prevent free access to the screwdriving location
- Screwdriving cycle time from 2-3 sec. possible.
- Download Datasheet
Controller (SGS 2040)
- Sequence controler
- 7" touch
- Anybus optional
- Pneumatic components
- Download datasheet
Spare parts SE
3 x bit
1 x bit adapter
1 x feed hose
Feed unit Segment feeder (SGF 3 ELK)
- Segment feeder
- Particularly suitable for fasteners with sensitive surface
- Works without vibration
Controller (SGS 2060)
- Sequence controler
- 7" touch
- Anybus optional
- Pneumatic components
- Download datasheet
Spare parts SEV
3 x bit
1 x screw driving tool with vacuum suction tube
1 x feed hose
Controller
No clear assignment to a controller was found.
Please contact us, we will find a solution.
Function diagram
You want to built the controller yourselfe and just need a pneumatic and a function diagram.
Documentation
The documentation is a central component of the machine and is supplied in German
- 1 x paper copy
- 1 x pdf on CD
- operating manual
- spare parts list
- technical documentation
- checklists, certificates
Documentation English
- Documentation in english
Documentation EU
- Documentation in the official language of the EU country
ESD - conform
- Machine in ESD version
- Attention! Feed hose in ESD version black
Spare parts labeld
- All spare parts are labled with artikel number
Comissioning
- Comissioning support in Germany, Austria or Switzerland
- 2 days including 1 day travel
- Including travel and hotel cost
Comissioning EU
- Comissioning support in Europe
- 3 days including 1 day travel
- Including travel and hotel cost
Machine capability studie MFU (6 Sigma test)
- According to VDI/VDE 2645
- Protocol with 50 measurements
- Machine capability study (Preliminary PFU)